Zimmer Cryo 6 Hose

The Zimmer Cryo 6 Hose is six feet in length and is used with the Cryo 6 cooler.  This treatment hose has a nozzle connector that allows the operator to easily connect the Cryo 6 Hose to the Cryo 6 cooler. By pushing up, rotating slightly clockwise, and than pulling down gently the Cryo 6 Hose will lock into place at the air outlet of the unit.  There is an Allen screw inside the nozzle connector that must align with the grooves of the air outlet in order for the hose to remain in the lock position.  The grooves in the air outlet can be referenced as a bayonet catch.  The bayonet catch permits the hose to be connected.  Once the hose is in position, the chilled air from the Zimmer Cooler unit can be delivered to the treatment site via this application tube.  The Cryo 6 unit can deliver -30C air continously through this insulated treatment tube, successfully and effectively, without frost buildup or leaks. The operator can remove the Zimmer Cryo 6 Hose by gently pushing up on the nozzle connector, than turning the connector counterclockwise, and finally pulling forward.  This should release the tube connection from the bayonet catch.

Zimmer Cryo 6 Hose

The Zimmer Cryo 6 Hose is lightweight, flexible, and easy to use.  

The operator should never pull the treatment tube when trying to move the Zimmer Cooler.  The Cryo Six is on wheels and can be easily moved without pulling on the treatment tube.  The Zimmer Cryo 6 Hose should not be stretched or pulled on when trying to reach those hard to treat areas.  Pulling or stretching the hose can cause damage, compression points, and holes inside the treatment tube.  You can determine if there is damage to the tube by running your hand over the entire length of the hose feeling for air gaps, the unit must be running while performing this test.  Some Cryo 6 Hoses that have air leaks will have air releasing at the leak site and might present moisture or frost around the site.  Air traveling from the cooler to the treatment site should only be released at the end of the hose not anywhere else.  If air is being released elsewhere on the hose, it may be a sign of a hole in the treatment tube.  If no air is blowing out from the hose or the air stream is weak, you may want to disconnect the therapy tube from the Cryo 6 unit and blow through it to check for blockages, holes, or compression points.  Holes, blockages, and compression points effect the performance of the Zimmer Cryo 6 Cooler and can reduce the amount of air that may reach the treatment site during the course of a treatment. You will need to replace the Zimmer Cryo 6 Hose if a hole, blockage, or compression point is determined.

Cryo 6 Focusing Tip Insert


The Zimmer Cryo 6 Focusing Tip.  

The Focusing Tip inserts at the end of the hose and provides the operator a way to control the air stream.  The Zimmer Cryo 6 Focusing Tip can easily attach to the hose by gently inserting the tip into the distal end of the hose.  The plastic portion of the Focusing Tip slides in and out to extend range, and can provide a way for the operator to accommodate those hard to reach treatment areas.  The Zimmer Cryo 6 Hose can be used with or without the Focusing Tip.  The Cryo 6 Focusing Tip is sold separate from the hose and is an accessory item, but may be included with the purchase of a New Zimmer Cooler as is the Cryo 6 Hose.

Cryo 6 Hose With Focusing Tip


The Zimmer Cryo 6 Articulating Arm.

The Zimmer Cryo 6 Articulating Arm allows the Cryo operator to be hands-free from holding the Cryo hose while performing a cosmetic treatment.  The treatment tube clips onto the distal end of the Articulating Arm and hangs over the Articulating Arm Hanger.  The Zimmer Cryo 6 Hose remains stationary over the treatment site during the course of the treatment, and can be re-positioned according to the Cryo operator’s needs.  The Cryo 6 Articulating Arm and has a pole that slides through the glass top into a connector located at the base of the cooler.  The connector is found on mounting bracket located underneath the Cryo 6 cooler.  This pole also accommodates the articulating arm.  The Articulating Arm is an accessory item and is sold separate from the Zimmer Cryo 6 Hose.

Zimmer Cryo 6 Articulating Arm