There are many cosmetic lasers used on the market today. Depending upon the laser, it is capable of removing hair, removing scar tissue, resurfacing the skin, and much more. It is imperative to any physician, medical practitioner, laser practice, surgeon, or medical spa to know about the different lasers and more specifically, the amount of heat generated during the process in order to provide comfort to the patients while undergoing these laser procedures.
Most procedures only take between 10 minutes and one hour to complete. There may be several passes of the laser during that time and settings will be controlled per patient based upon the type of treatment received as well as the skin type. Some lasers can become much hotter than others and not everyone will be able to handle the heat that is used.
In many instances, patients will need more than one treatment in order to see the desired results, especially as it applies to skin resurfacing, removing tattoos, and even removing or minimizing the appearance of stretch marks. Prior to the next treatment-taking place, the skin will need to heal, which usually takes between 10 and 45 days.
There are many different types of cosmetic lasers; this includes ablative and non-ablative lasers. Each one can vary dramatically in terms of what they are used for, the heat that is generated, and the amount of recovery time for a patient. Some lasers can cause more downtime than others and can result in postoperative bruising, pigmentation changes, and various other side effects.
Within the ablative lasers, which are commonly used for treating deep-set wrinkles, acne scars, corns, moles, birthmarks, skin pigmentation, and other damage to the surface layers of the skin, there are two types of lasers commonly used by doctors. An ablative laser is designed to remove the skin surface, which will cause peeling.
The carbon dioxide for CO2 laser is used to treat a variety of skin issues, including sun damage, skin tags, all warts, birthmarks, acne scars, and deep-set wrinkles. Traditionally, CO2 lasers take the longest to heal and are associated with a high risk of Redskin and scarring. Much of this has to do with the heat involved with using these layers.
There have been advancements within CO2 technology and there are now fractional CO2 lasers that are less invasive and require less time for recovery. This type of laser is not going to provide desired results for everyone, as people who are Asian are going to be at a higher risk for hyper-pigmentation.
The erbium laser is used for fine lines, acne scars, sun damage, moles, small to moderate wrinkles, as well as skin pigmentation problems. This laser is effective for people with light and dark skin tones and while some swelling, redness, and bruising may be visible, the downtime is considerably less because it is not going to burn the skin as significantly as a CO2 laser.
A non-ablative laser is not going to remove the surface of the skin, which will not cause any kind of feeling. Instead, it is directed to the second skin layer in order to create new skin cells. Non-ablative lasers are used to treat vascular lesions, rosacea, spider veins, broken capillaries, stretch marks, as well as to rejuvenate skin and remove tattoos.
A PDL laser is most commonly used for treating birthmarks, stretch marks, and rosacea, though it is also used for vascular lesions as well as broken capillaries. It is common to see post-operative bruising as well as a temporary pigment change following a procedure and is often related to the snap of a rubber band. The goal is to make the skin less red through the use of this laser and is achieved by shrinking the blood vessels.
The Nd:Yag Laser is commonly used for tattoo removal, skin pigmentation issues, as well as hair removal. It has a low success rate for treating skin issues and therefore is not the laser of choice for such things. There are several different brands of this non-ablative laser and depending upon the settings, can generate a significant amount of heat.
The alexandrite laser is popularly used to treat like veins, remove hair, and remove tattoos. It is capable of removing some of the finer hairs as well as removing yellow, green, and black pigments from tattoos. It is particularly effective with people who have pale skin. In addition to the alexandrite laser, a ruby laser may also be used, which can help to remove other pigments from tattoos as well as address other types of hair.
The RF and ultrasound lasers are most commonly used for body sculpting and getting rid of loose skin. Ultrasounds or radio frequencies are sent into the body. It is a form of ultrasound, electrical, and vacuum currents that can target stubborn areas of fat and cellulite. It can be used across the body and can result in almost no downtime. Some of the machines can generate a significant amount of heat, leading to discomfort on the side of the patient.
Lasers have been known to get very hot because they are essentially vaporizing the damage skin cells. The laser, when connected with the skin, has the ability to stimulate collagen production, tighten and smooth the skin, and remove layers of damage skin. In order for all of this to happen, heat needs to be used. The amount of heat will vary based upon the laser as well as the manufacturer.
Certain lasers are going to generate more heat than others. Many of the non-ablative lasers are going to generate a considerable amount of heat, which means that some method of cooling the skin down needs to be used in order to reduce the pain associated with the skin resurfacing treatments. The erbium laser, which is an ablative laser, is one of the most popular lasers used for skin resurfacing because it produces less heat and is less likely to burn surrounding tissues. However, even the erbium laser can get hot.
It is not just the heat from the laser that can be uncomfortable to the patient. It can be the general presence of the laser, which feels like it is slapping the skin, similar to the pinch of a rubber band. Many people grow uncomfortable with this feeling, which is why it is critical for doctors to understand the overall experience of the procedures and what is caused with each laser that is in use within the office.
When there is a lot of heat, patients will grow uncomfortable after short periods of time. Particularly when some lasers are capable of getting hotter than others, doctors need to know how to cool the skin down in order to continue with the procedure. Considering most procedures go for 30 minutes or longer, patients need temporary skin relief in order to sit in the chair or lie on the table for the duration.
CryoTec offers a variety of Zimmer MedizinSystems Cryo Chillers in order to help cool down the skin while a patient is undergoing a laser procedure. These can be advantageous in comparison to ice packs, cryogen spray, and other cooling methods.
The gel, sprays, and ice packs have been used for many years. They can lead to a considerable expense within the office because they are consumables. The ice packs need to be produced for each patient. Gels and sprays can be used quickly on patients depending upon their pain tolerance. It can also lead to more of a mess because the gels and sprays can get onto the laser as well as other equipment during a procedure.
Regardless of what is used, there is the need to keep the skin cool. Doctors and aestheticians need to consider the most affordable and most effective solution for cooling the skin down before, during, and after the use of cosmetic lasers.
When the skin is kept cooler, it can minimize the amount of pain during laser as well as IPL treatments. They can also be used during cosmetic injections to provide temporary relief. The epidermis is being exposed to lasers and when there are various airflow rates, it allows a person to experience a cooling sensation that can lead to a more positive experience for the overall procedure.
The Zimmer MedizinSysteme Cryo 5 is a laser chiller that features easy maintenance and one-touch operation. It has a light weight hose that can be used for the latest aesthetic trends and can minimize the pain experienced during laser as well as IPL treatments. There are six speeds that can be used, providing operators the ability to change the intensity of the cooling system. No consumables are required and provide a long-term cooling capability.
A significant amount of technology, engineering, and performance are delivered within the Cryo 5. It can be moved from room to room, which enables many smaller officers to have a single laser chiller within their location.
The Zimmer MedizinSysteme Cryo 6 provides a sensor touch glass keyboard and glass top. There is also a lightweight hose that allows doctors and aestheticians to deliver the correct amount of chilled air to a treatment area. There are nine fan speeds in total, making it easy to control the amount of air going to an area and there are user-defined programs to simplify the cooling system for various procedures.
The Zimmer MedizinSysteme Cryo Mini is capable of cooling the skin before, during, and after laser treatments area is capable of filtering and cooling down ambient room air all the way down to -10°C. It has the capability of delivering 1000 L of air per minute and does not require any consumables in order for it to operate.
It is a popular option for laser treatments and can provide temporary relief to the skin. With the ability to cool the skin down on the spot, it can also reduce thermal tissue damage, particularly when cosmetic lasers are being used. Operators have the ability to control the intensity of the cooling system with a total of nine airflow rates.
The Zimmer Medzin Chillers all share a number of popular features. This ensures that the benefits are considerable regardless of which model is purchased. There are locking wheels, making it easy to move the cooler from one room to another and then keep it in place.
The units provide hands free operation with a easy to use display. This ensures that doctors and aestheticians are able to explore the various settings and have a definitive understanding of the settings prior to proceeding with a procedure.
No consumables are required and this keeps the cost of use down considerably. Other coolers and products require consumables, which means that it is an ongoing expense that can add up quickly, especially when a doctor’s office is providing multiple laser procedures in a day.
There are some considerable variations between the Cryo Mini, Cryo 5, and Cryo 6. Each one has their benefits and need to be considered in order to provide the best benefits to a doctor’s office.
The Zimmer Medizin Cryo 5 is no longer in production. The Cryo 5 has only has six fan speeds, but it can deliver a -30°C air temperature. It provided long-term cooling and hands-free operation.
For offices that need more fan speeds, the Zimmer Medzin Cryo Mini delivers, along with a glass top and a glass touchpad. It weighs the least amount out of the three models, though it is designed for short-term cooling durations and only delivers around -10°C air temperature. Depending upon the lasers that are being used, this may be sufficient.
The Zimmer Medzin Cryo 6 is considered to be the most versatile unit as it provides nine fan speeds, delivers a -30°C air temperature, long-term cooling duration, as well as a glass top and glass touchpad.
It is possible to start with one unit and then upgrade to another in the event that a location needs more fan speeds or needs more overall versatility.
There are countless benefits associated with keeping the skin cool. Regardless of whether a doctor uses a gel, Zimmer MedzinSysteme Chiller, or anything else, skin that is cool will be able to experience a faster recovery.
Generally, when the skin is kept cool throughout the procedure, there will be:
– Less redness
– Less swelling
– Fewer risks of pigmentation changes
– Faster healing process
Any time that lasers are used, doctors need to consider how to protect the patient. There are various products that are used to cool the skin down, though many involve consumables that can raise the cost of doing procedures. When consumables need to be ordered for keeping the skin cool, it leads to more paperwork as well as the possibility of being out of stock on an item when a procedure is scheduled.
A Zimmer MedizinSystems Chillers offer all of the benefits associated with keeping the skin cool during laser procedures, and provides a one-touch operation that makes it easy to deliver cold air to the skin while using a laser simultaneously. This can help to keep patients comfortable, ensure that they have a positive experience within the office, and can decrease the amount of recovery time following their procedure.
Once a doctor understands the various cosmetic lasers and how they can generate heat, it is possible to find out the most effective ways of cooling the skin to keep patients comfortable and ensure they enjoy a fast recovery time.
The content above is some information that we wanted to share. It is not intended to be used for medical purposes. Please let us know your thoughts and comments of this article by posting below.